Showing posts with label FP4 Plus. Show all posts
Showing posts with label FP4 Plus. Show all posts

Sunday, 28 February 2021

'ADDITIONAL POURTRAYALS [sic]'

"One of the internet's most intriguing capabilities, for a topographical film-maker, was that it offered contemporaneous views of distant landscapes. During 1996, I had heard that there were websites where one could access the cameras that observe traffic on UK motorways, and immediately conceived a strong desire to explore, and perhaps to sample, what I imagined would be a large and increasing number of real-time moving images of landscapes throughout the world. I wondered, perhaps, one day, I might be able to make a film without leaving the house."
Patrick Keiller, 'The Robinson Institute'

"And then, again, a sudden light, and recurring darkness.”
O. Winter, ‘The Cinematograph’, May 1896

Just short of a year ago, I filmed two views in Ilford, with an 8mm camera facing the locations which had once been entrances to Britannia Works, a large factory site that was the main manufacturing base for the photographic company that became Ilford, Limited, and wrote about this as 'Workers Not Leaving The Factory'. Due to a sense of dissatisfaction with the results, I had a desire to revisit the location and film the site again. In the latter part of last year, I realised that the opportunity might coincide with either one of two significant anniversaries: in December, it would 125 years since August and Louis Lumière demonstrated projected moving photographic images to a paying audience, which, despite other prior claimants, is seen to mark 'the birth of cinema'. The other anniversary was 21st February, when the Lumières' films were first shown before a paying audience in London in 1896.

Original 2x8mm negative, digitally inverted

Last year, I shot the film on Ilford FP4 Plus, using a length of 16mm-wide film cut down from medium format. As a result, this did not have perforations, but I found that, imperfectly, this would be driven through a Bolex B8 camera by the friction of the pull-down claws alone. Using this film involved many compromises, particularly in duration, so I had been looking out for Ilford ciné film on a certain well-known auction site, and, eventually, a couple of rolls of 16mm Ilford Fast Pan film turned up, and were purchased. The labels on both read "date of test 6.1.69", meaning that the film would have been made at the Britannia Works site in Ilford before production there stopped in the mid-1970s. In addition, I also acquired a couple of Kodak 16mm movie cameras, one of which was made in England, so I was set to film a new version of 'Workers Not Leaving The Factory' at the site of the now-demolished factory, with vintage Ilford film made there, and possibly with an English-made 16mm camera. The ideas that I had touched upon in writing about the filming last year were still appropriate of course, but I hoped the material aspect of this action now had more resonance.

Ilford Fast Pan 16mm Film

The current coronavirus pandemic, and its particular severity in the UK, upset my plans. I had filmed last year on the 3rd of March. Less than two weeks later, my workplace moved to remote working, preceding the government's general 'stay at home' injunction by a little over a week itself. In December 2020, I was still recovering from Covid-19, having contracted the virus in mid-November, which precluded filming on the 28th, the date of the Lumières' first public showing at the Salon Indien du Grand Café, Paris, in 1895. With daily new infection rates in the tens of thousands, and infections in London running at an estimated rate of around 1 in 30 of the population by the beginning of January, new restrictions were put in force across the UK. Having largely recovered from the virus myself by the second anniversary date of 21st February when the Lumières' films were first shown in London, I could have returned to Ilford to shoot these two locations again. However, the 'stay at home' injunction still applied. Reasons to leave home included travelling to a workplace if that work could not reasonably be carried out at home; arguably, this filming could have come under this definition of 'work', but I felt it was hardly within the spirit of the rules. Another reason for leaving home would be for daily exercise, once a day, and I have used my daily exercise to take photographs while walking a route around my local area; in this rule, the 'local' is stressed: although Ilford is less than 5 miles from where I currently live, again, this feels outside the spirit of the rules, particularly so when one uses a tripod, which makes the act of taking photographs (or filming) seem less like an incidental aspect of daily exercise and something more intentional.

Given the 'stay at home' order, nevertheless I still wanted to mark this anniversary. The act of projection itself, appropriately, would take the place of location in importance. Last year's film physically existed as two negatives, 16mm-wide, without perforations, the frames running in both directions along their lengths. Having been given a dual-format 8mm/Super-8 projector for Christmas, if I could make a positive print from these negatives, I could project my film. With perforations it would have been possible to make a contact print by sandwiching the negative film on top of a roll of unexposed film and, running both through a camera, this would expose the fresh film through the negative, and, once developed, this would result in a positive print. However, in using cut down Ilford FP4 Plus film, my original negative didn't have perforations. Although the film had gone through the camera without perforations at the time I shot it, trying to run this back through the camera with perforated film underneath might have worked, but my Bolex B8 had developed a fault with its motor, and wasn't running properly (I also think that there would be a high likelihood of the unperforated negatives slipping against the fresh film; if the negative had perforations this would keep the two layers of film aligned while running through the camera).

The only practical solution within easy reach was to expose the two separate negative lengths as a contact print with fresh film underneath. As the original negative had erratic frame spacing, there was no way of ensuring that the frames would be correctly aligned with the perforations in the positive print, so, as a fait accompli, there was simply no point in worrying about accurate registration. The hardest part of the exercise was lining up the long strips of 16mm-wide film in complete darkness before exposing these, only partly successful, and this became another contingent fact in the print, whereby the successive frames wander in both horizontal and vertical directions as a result. Not having a single sheet of glass large enough to cover the whole film, I used two sheets in an attempt to keep the film as flat as possible during exposure, with some of the film not held flat at either end and the edges of the glass showing in the prints. 

Orwo UP21 DS8 Film
I tried a test with 1970s Orwo UP15 2x8mm film stock, which, although I've had good results in the past from similar vintages, was too fogged to be of any use. For the final prints I used Orwo UP21 double Super-8 film with a develop before date of April 1991. Double Super-8 (or DS8) film and cameras use the principle of 2x8mm film in that the camera exposes frames on one half of the width of roll of 16mm-wide film, which is then flipped around at its end and run through the camera a second time, exposing the other half; once developed the film is split into two 8mm widths which are then spliced together–the crucial difference is that the DS8 format uses the much smaller Super-8 perforations, ensuring a larger frame size, while taking advantage of not using the plastic Super-8 cartridge with its built-in plastic film gate, supposedly allowing for better frame registration, as well as other aspects of 2x8mm, such as being able to run the film backwards through the camera for in-camera effects like dissolves made by the double-exposure of a fade-in over a fade-out.

I made one test with the UP21 DS8 film to get a rough idea of exposure, then contact printed the negatives onto the film, developing it in Ilfotec LC29 diluted 1+19 for 9 minutes at 20ºC. I cut these prints to 8mm width by hand, somewhat imperfectly (I had ordered a 2x8mm splitter the day before, realising this would be useful, but I went ahead with cutting the prints by hand, not thinking that the splitter would arrive a couple of hours later).

Contact print on Orwo UP21 DS8 film;
the diagonal white line lower right is the edge of one sheet of glass

Unable to film in Ilford on the 21st, I wanted to connect–visually–the projection of my film from last year to the site with some form of simultaneousness to Ilford on the 21st of February. I conceived that the manner of achieving this could be through streaming a live projection of a webcam from the town and recording both projections at the same time. I found just one such instance online with any kind of proximity to the site of Britannia Works: a traffic camera on the A118 Romford Road looking in the direction of Ilford Hill, across the river Roding underneath the A406 flyover. Britannia Works would have been off to the right of the field of view of this camera, but at some point Ilford Limited had expanded their operations to include properties between Roden Street and Ilford Hill, including the use of a skating rink, which would have been somewhere in the location of the building with the white double-height ground floor seen on the camera. Close by, there is another camera on Mill Lane, offline at the time of writing: in my research I found no connection between the paper mill which gives the road its name and the raw materials supplied to Ilford for the manufacture of photographic paper. There is also a webcam focused on a depth gauge in the Roding, although this only provided a still image; this could be 'animated' through refreshing a web browser window to update the image, but this had less of the 'liveness' of the traffic camera, although there was an association there to be had with the anecdote in Silver by the Ton of drying the glass used for photographic plates by the banks of the river while the area was still semi-rural at the end of the nineteenth century, as well as the risk of flooding on Riverdene Road that caused the houses that once backed onto Britannia Works there to be built with a slightly raised lower storey.

Contact print on Orwo UP21 DS8 film; 
the second location on Riverdene Road

The passage from Patrick Keiller's 'The Robinson Institute' that continues from the quote at the top of this post quickly punctures its utopian idea: Keiller goes on to write about how this promise of electronic flânerie was more imagined than realised at the time, in the late 1990s, there being relatively few websites providing actual live streams rather than, like the flood gauge in the Roding, still images that needed constant refreshment. At the time of writing twenty-five years later, the idea of scouring the internet for websites showing live images from anywhere around the world–for some experiential form of spatially-dislocated dérive–seems to me something of a relic of the idealistic promise of those early years. Other forms have supplanted the simple live webcam view: the experience of Google Street View, for example, while affording the opportunity to travel virtually through many towns and cities around the world does not allow the user to experience the simultaneousness of the live stream; this simultaneousness is now part of the everyday with various videoconferencing platforms, but using these has a tendency to subsume any kind of pleasure in the experience of dislocation into pragmatic and productive concerns.

The traffic camera I found looking in the direction of Ilford Hill only provides a short loop of a few seconds: this loop is updated every few minutes online. However, this suited my purposes as the short lengths of film that I projected are only seconds long (I didn't have the right equipment to splice the film together into one continuous length), and each section would have to be separately threaded into the projector; in the interim I could refresh the page to update the loop from the traffic camera to its most recent version. This webcam stream also had a date and timestamp, functioning as evidence to the specificity of the day I projected and recorded it as 'live', returning to the location remotely. There was a provisional quality to the composition of these two projections, utilising an otherwise neglected corner of a room, furnishing it with some of the ephemera that I'd collected in my research into the history of the Britannia Works site in Ilford, sufficient to give a texture to the white walls. I had envisaged the possibility of recording this set up with multiple camera angles, close ups of the various elements within the frame: the business of just projecting the film and documenting this action took precedence over anything more complex than a single angle, static camera.

I had problems in the actual projection of the film I had made. The short lengths had no leader: I had made the contract prints longer than the negative strips, with this extra length acting as a leader, but leader material tends, I think, to be a little thicker than the film itself. The projector I used has automatic threading, which frequently refused the prints I'd made; sometimes these would go through smoothly, but did not always come out the other end of the film path of the projector (also an issue to do with the material's thickness), which then had a tendency to fold itself up inside the projector, and, once creased, was even less likely to cleanly run through the projector, jamming in the gate, which sometimes could be shepherded through by toggling the frame. In addition, thanks to being hand cut, some parts of the film were a millimetre or so too wide, which was relatively easily solved by trimming a sliver from the edge; some parts of the film were not wide enough, and this caused it to jam, possibly by having too much side-to-side play when engaging the projector's pull down mechanism. Despite these issues I was able to film the four separate parts of the footage (each location's filming having been broken over the two lengths of the original cut-down negative); I also kept a section where one length of film jammed in the projector's gate, partly as this print shows a good deal of the lettering in the film rebate, notably 'ILFORD' itself. The duration is shorter than the original film: this was shot at 12 frames per second; although the projector does have adjustable frame rates, it seems to only run at 16fps. I tried slowing the playback to 75%, but found the distortion of the slower audio (even at its original pitch) more distracting than anything gained by seeing the film at the rate intended. With all these contingent factors, the film itself as projected has become fragmentary and somewhat abstract, the image sliding across the frame, hard to fix. Perhaps, in terms of "photographs in motion" (a phrase from David Campany in Photography and Cinema, on the Lumières' first film) the least obstructive section is the very brief few frames in which a pedestrian crosses the screen, but the focus here is off, partly due to the contact print, compounded by the projection itself, in which, thanks to the hand-made quality of the material, needed constant readjustment.

Contact print on Orwo UP21 DS8 film showing both
irregular vertical and horizontal framing

Writing about the beginnings of Ilford, Limited under Alfred Harman last year, I described it as "literally a cottage industry" in that, having outgrown his basement on Cranbrook Road, Harman rented a cottage on the Clyde Estate as his first expansion into the location which would become Britannia Works, rapidly incorporating many more cottage buildings, some of which remained on the site until demolition nearly a century later. This use of domestic space as a site of production was something I wrote about at the end of 'Workers Not Leaving The Factory', or rather, more specifically, the de-localising or re-localising of production outside of a strict spatial definition of 'the workplace'. The global pandemic has accelerated some of these trends, while delineating what kind of work could be moved online easily (although not always pursued) against work impossible to carry out remotely. Surrounding the filming in Ilford a year ago, the consumption the supermarket that has replaced Britannia Works allows relies on the productive work, necessarily tied to a number of spatially-located specificities, non-virtual, culminating in the supermarket itself; the construction work just off-frame is also solidly tied to the real, real bricks, real concrete, and the physical labour required to configure these materials into living spaces, such spaces now co-opted into being the site of production for many, unforeseen a year ago.

The title used here comes from a reproduction of the original programme of the Lumière films shown in London in 1896: their first film, of workers leaving the Lumière factory, is not among the titles listed, but the possibility that it may have been shown is tantalisingly suggested by the promise that the programme "will be selected from the following subjects, and will be liable to frequent changes, as well as ADDITIONAL POURTRAYALS [sic]".


Sources/Further reading:
David Campany, Photography and Cinema, Reaktion Books, London 2008 (2012 reprint)
RJ Hercock and GA Jones, Silver by the Ton - A History of Ilford Limited 1879-1979, McGraw-Hill, London, 1979
Patrick Keiller, 'The Robinson Institute', The View From the Train, Verso 2013
O. Winter, ‘The Cinematograph’, The New Review, May 1896 (https://picturegoing.com/?p=4166 retrieved 21/3/20)


See also the bibliography of 'Workers Not Leaving The Factory'.

Thursday, 31 December 2020

Revisiting the 'Wide Pic' Panoramic Camera

Wide Pic Panoramic Camera with Ilford FP4 Plus

After using the Coronet 66 last month for the #shittycamerachallenge, I decided to revisit a camera used previously for the challenge - the Wide Pic Panoramic Camera. I made little concession to the lighting conditions when shooting with it - I only had a couple of part-used rolls of Ilford FP4 Plus, and even shooting on days when it was sunny, on a couple of convalescent walks, the light was still not bright enough. I could have pushed the FP4, although the main issue was lack of shadow detail, so this may not have helped much. When using the camera before, I'd used 400 ISO film in the summer, which was fine for the single speed, single aperture plastic camera; ideally I would have used HP5 Plus perhaps, and developed it in such a way as to try to get as much shadow detail as I could, but, such is the contingent nature of the #shittycamerachallenge that the photographs will have to suffice for the last post of the year.








Sunday, 22 March 2020

Workers Not Leaving The Factory

“The lights leap up, and at their sudden descent you see upon the cloth a factory at noon disgorging its inmates. Men and women jostle and laugh; a swift bicycle seizes the occasion of an empty space; a huge hound crosses the yard in placid content; you can catch the very changing expression of a mob happy in its release; you note the varying speed of the footsteps; not one of the smaller signs of human activity escapes you. And then, again, a sudden light, and recurring darkness.”
O. Winter, ‘The Cinematograph’, The New Review, May 1896

“Immediately after the command had been given to leave the factory back in 1895, the workers streamed out. Even if they sometimes got in each other's way - one young woman is seen to tug at another's skirt before they part in opposite directions, knowing that the other will not dare to retaliate under the stern eye of the camera ­- the overall move­ment remains swift and nobody is left behind. That this is the case is perhaps because the primary aim was to represent motion, maybe sign­posts were already being set. Only later, once it had been learned how filmic images grasp for ideas and are themselves seized by them, are we able to see in hindsight that the resolution of the workers' motion represents something, that the visible movement of people is standing in for the absent and invisible movement of goods, money, and ideas circulating in industry.
The basis for the chief stylistics of cinema was given in the first film sequence. Signs and symbols are not brought into the world, but taken from reality. It is as though the world itself wanted to tell us something.”
Harun Farocki, ‘Workers Leaving the Factory’
La Sortie de l'Usine Lumière à Lyon, known in English as Workers Leaving The Lumière Factory in Lyon, Employees Leaving the Lumière Factory, or simply Exiting the Factory, was the first film to be projected in front of an audience, at the Société d'Encouragement de l'Industrie Nationale, on 22nd March 1895. It was the only film that Auguste and Louis Lumière then had available, and was shown, almost as an afterthought, following demonstrations of the Lumières’ experiments in colour photography. That this scene was chosen for the subject of their first film must be largely due to the pure, combined contingencies of proximity, of movement, and of light. The Cinématographe, fixed, unmoving, faces the entrance to the photographic plate factory in Lyon established by Antoine Lumière, Auguste and Louis’ father, and records the factory workers leaving through a large double gate and an adjacent doorway. The hand-cranked Cinématographe, a camera, printer, and projector combined in one device, was perhaps loaded that morning in the factory that ones sees in the shot; the film may well have been developed, and, now as a negative, dried, run back through the Cinématographe in contact with a fresh roll of film to make a positive print all in a day. Descriptions of La Sortie de l'Usine Lumière à Lyon refer to it being “dinner hour”, “the noonhour at the factory”. Early film relied almost exclusively on daylight due to the limited sensitivity of the photographic emulsions available at the time, combined with the need for short exposure times in order to achieve sufficient successive frames with a fast enough shutter speed to create the impression of movement when played back. The noon hour outside the factory would provide the brightest intensity of available light during the day, and, additionally, the sun is behind the camera at that point in its path through the sky, ideal for defining the figures emerging into the street from the yard with the factory buildings behind (the factory entrances face south-south-west). Presumably, the first two contingent factors, of proximity and light, naturally suggested the third, movement:
“The Lumieres made several films of people filing past their camera, including one of workers leaving their factory, the first film to be screened publicly. The subject matter was ideal: endlessly different figures passing through a fixed frame express so much so simply, about photographs in motion.”
David Campany, Photography and Cinema
There are in fact three extant versions of La Sortie de l'Usine Lumière à Lyon which suggests that the Lumières were sufficiently captivated by the subject to film it more than once, but perhaps also that they may have been unsatisfied with their first film itself. The version that Harun Farocki analyses in ‘Workers Leaving the Factory’ starts with the gates opening and ends with them closing, and appears the most organised visually (“In the Lumière film about leaving the factory, the building or area is a container, full at the beginning and emptied at the end. This satis­fies the desire of the eye, which itself can be based on other desires.” Harun Farocki, ‘Workers Leaving the Factory’): the detail of one of the workers pinching the skirt of another before they part in different directions appears a knowing gesture, an improvisation or a deviation from the script which may itself suggest a familiarity to repetition. Farocki’s assertion that the worker whose skirt is tugged “will not dare to retaliate under the stern eye of the camera” is emblematic of the direction that these workers are subject to. The three different versions of the film are known by the presence - or absence - of a horse-drawn conveyance: it appears in two versions of the film, drawn by one horse in one, two horses in another, absent in the third. Farocki uses the ‘no horse’ version in his film Workers Leaving the Factory; the figures streaming out of the factory gates, already open, in the one-horse film appear less organised than the ‘no horse’ version. The version of La Sortie de l'Usine Lumière à Lyon was that was shown at the Société d'Encouragement de l'Industrie Nationale on 22nd March was filmed three days earlier on the 19th: in the one horse version, the shadow of bare branches can be seen on the ground, suggesting a date early in the year, as does the workers’ clothing - lighter clothes and bare arms are on show in the no-horse film and the shadow of the tree or trees behind the camera show that the leaves are out; all three variants were shot in sunlit conditions, and the visible shadows are relatively short, indicating a high angle of the sun in the sky, suggesting all three were filmed near midday. A more forensic analysis could no doubt place the time of day and year more precisely, given that the geographical location is known (the Institute Lumière reproduces the two-horse version on their website as the Lumières’ first film; this version is more tightly framed, but the workers' clothing here again appears lighter than the one horse version).

Following the Lumieres’ first showing of projected films to a paying public on 28 December 1895 at the Salon Indien in the Grand Café, Paris, the Cinématographe was demonstrated to the public in London, at the Regent Street Polytechnic, on the 21st February 1896, with an invited audience the day before. The Polytechnic's own magazine reported the event as:
"a special exhibition of a new invention by MM. Auguste and Louis Lumière – the Cinématographe. [...] For instance, a photograph of a railway station is shown, two or three seconds elapse and a train steams into the station and stops, the carriage opens, the people get out and there is the usual hurrying for a second or two, and then again the train moves off. The whole thing is realistic, and is, as a matter of fact, an actual photograph."
The Polytechnic Magazine, 26 February 1896
The initial showing had a very small audience, fifty-four paying viewers, but, as in Paris, the Cinématographe's popularity, no doubt gained through press notices and word of mouth, soon required showings every hour on the hour between 2 and 10pm. Forty years later, the Regent Street Polytechnic marked the anniversary of this showing with a repeat of the original films and an exhibition, which situated the Cinématographe amongst other technologies creating the illusion of the moving image, the phenakisticope, zoetrope, Edison's Kinetoscope, and was opened by Louis Lumière himself. 'The Lumière Celebration' programme reproduces the original list of films shown in February 1896: La Sortie de l'Usine Lumière à Lyon is not listed; however, tantalisingly, there is a sentence that reads that the programme "will be selected from the following subjects, and will be liable to frequent changes, as well as ADDITIONAL POURTRAYALS [sic]".

The Lumière's Cinématographe used 35mm-wide film, but, unlike Edison's Kinetoscope, which essentially introduced the form of 35mm perforated film still in use today, this used a single round perforation per frame on each side. Smaller formats were soon developed for amateurs: Kodak developed 16mm film, and, a few years later, repurposed it by doubling the number of perforations, and created the 2x8mm format which was popular for home movies until Kodak produced the Super-8 cartridge which all but made 2x8mm obsolete. Despite its near-obsolence, I have used 2x8mm film in recent years; in experimenting with a Bolex 8mm camera, I discovered that unperforated 16mm film would run through it. I had tried some single-perforated 16mm Double-X film, to test exposure and development of that particular film with the camera. The perforated side ran through the Bolex with the frames overlapping in pairs, a result of the 16mm film having half the number of perforations of 2x8mm film. Having shot the perforated side, I turned over the film and tried shooting the unperforated side - which worked. As I had a length of Ilford FP4 Plus film cut down to 16mm, I tested this to see if I could shoot it with the Bolex camera, and it worked. With the #FP4Party returning this March, in my desire to do something different for it, I thought that I could actually make a short film shooting on Ilford FP4 Plus itself (coincidentally, when Ilford used to make ciné film many years ago, FP4 was one of the emulsions supplied in 16mm). Searching for a subject, I was provoked by seeing images of the location of Ilford's Britannia Works site on social media promoting this month's #FP4Party; these were of course familiar, as in 2013 I'd spent some time researching the Ilford company's beginnings in Ilford, writing a long post about this, illustrating it with photographs shot on Ilford document film with an Ilford camera.

Bolex test with unperforated Ilford FP4 Plus
Cutting medium format film to 16mm wide meant that duration would be fixed by its length. 120 rollfilm is about 82cm long; 2x8mm film has 80 frames per foot, meaning I could get something less than 240 frames per side on a cut-down section of film - not including losing a little of the length threading the film through the camera gate and on to the take up spool. The Bolex B8 has a wide range of filming speeds, so I was not constrained to shooting at the standard silent speed of 16fps, which would give just ten seconds of running time per side. To increase the duration of the film, I cut three lengths of medium format FP4 Plus, and taped these together in the dark; ideally, I wanted the film to be the same duration as those first Lumière films, which had a maximum running time of 50 seconds, taking 17 metres of 35mm film; shooting at 12fps, I thought it would be possible to shoot around 45 seconds on three lengths of cut-down FP4 Plus joined together. This also required loading, then opening the camera after shooting the first side to turn the film over, and finally unloading it all in the dark, to make use of as much of the film as possible. I took a changing bag with me to turn the film over on location after having shot the first side.

In my research into the Britannia Works site, I wrote briefly about my personal connection to Ilford, having grown up there, with my family moving to the town just before all the buildings on the Ilford site were demolished; we tended not to use the Sainsbury's supermarket that was subsequently built there at the time, but in the mid-1990s my brother bought his first house in a post-war estate at the far end of Riverdene Road from it. Away from London studying during this period, and after finishing my degree, I would stay there on occasion, as a result making it very familiar, but also associated with a particular period in my life. I think we may have also visited the Papermakers Arms pub on the corner of Roden Street and Riverdene Road once or twice, but around that time there were a number of pubs in the town that I only visited once or twice. I certainly went to the Cranbrook, a pub on the site of Alfred Harman’s home where he began making ‘Britannia’ dry plates in 1879, starting the business which was to become Ilford Limited.

As the FP4 film loaded into the Bolex, even with three lengths joined together, provided a short duration, I wanted a simple subject, one single fixed shot for each side of the film. I planned to film the locations where entrances and exits to Britannia Works, a factory manufacturing photographic plates like the Lumières', used to be, 125 years on from their first film. Changes to Ilford's Britannia Works site took place in 1896, the year the Cinématographe was exhibited in London, extending it to Roden Street, part of the current road layout. Revisiting the site this year in early March, around the corner on Riverdene Road, the two dilapidated houses next to the Papermakers Arms have gone since my post of 2013; these were demolished four years ago, and a new building is currently going up on their footprint. On Roden Street, opposite Sainsbury's, an area which also had some Ilford premises, Britannia Music Publishing had their headquarters, one of the few high rise developments while I was growing up in Ilford. In 2013, this too had been demolished and the site cleared, now populated with tall buildings in the process of being completed, typifying how land use has changed in the last decade or so.

Roden Street/Rollei 16 with Ilford FP4, develop before July 1975
I set up my camera opposite the exit to Sainsbury’s car park for the first shot. Before the changes to Britannia Works in 1896, the site boundary would have been roughly in the position of the ramp over the exit. I felt certain that the exit to car park itself would provide movement as I filmed: indeed, there was a worker painting the bollards between the way in and way out lanes as I set up the tripod. All around me, there was work going on as I filmed. Behind the camera, the understory car park beneath the new development was being surfaced with tarmac. In front, but just out of view of the lens, the pavement had been dug up and a lorry parked alongside. Two construction workers crossed the road behind this out-of-shot lorry as I filmed.

Riverdene Road/Rollei 16 with Ilford FP4, develop before July 1975
The second shot is of a narrow section of brick wall, projecting from the south-western corner of Sainsbury’s car park. In my research of 2013, I had identified this as fitting the size and position of an entrance to the alley that led to Britannia Works before the site was extended to Roden Street in 1896. As a subject, the blank brick wall is antithetical to the idea of “photographs in motion” and it looked as though there would be no movement at all when I began filming, perhaps appropriate to shooting what used to be an entrance but is no longer. The camera jammed as I filmed this. Opening it in the changing bag, one of the taped joins between two of the cut lengths of film was in the gate, and I moved this through manually. Continuing to film, a car and a pedestrian passed along Riverdene Road before the film ran out.

Rollei Super 16 cassettes loaded with Ilford FP4 film with a develop before date of July 1975
I also shot still photographs on Ilford FP4 with a “develop before” date of July 1975, the previous iteration of Ilford’s ‘Fine Grain Panchromatic’ film before the ‘Plus’ suffix was added. This FP4 is single perforated 16mm film, ready-loaded into 'Super 16' cassettes for the Rollei 16 subminiature camera. The film boxes state that the film is “Packed by Rollei-Werke Franke & Heidecke Braunschwieg Germany”. It’s entirely possible that this film itself was manufactured on the Roden Street site before the factory closed. The last photographic plates were coated there in November 1975; given that develop before dates are usually a few years from the point of manufacture, this FP4 film was possibly made around 1970, soon after FP4 film supplanted FP3. The 16mm film does not possess ciné film edge markings, but has frame numbering for the 12x17mm Rollei 16 format, as well as the stylised ‘R’ from the Rollei typeface. I did briefly consider using this film in the Bolex, but the Rollei cassettes only contain approximately 50cm of film, much shorter than the cut-down medium format FP4. In addition, the tests I’d previously made demonstrated that with standard 16mm perforations the frames would overlap on the perforated side, which would be hardly ideal.

Ilford Sprite camera in Redbridge Central Library/Rollei 16 with Ilford FP4, develop before July 1975
After shooting the film and taking some still photographs, I went to Redbridge Central Library, where I’d conducted my research in the local studies section seven years ago. There, in the non-fiction section, I photographed the small display case containing an Ilford Sprite camera, a box of R.52 Panchromatic plates and rolls of 35mm HPS film refills. The local studies section has been reorganised since I was there last (the museum itself appeared unchanged, with its case about Mary Davis, who worked at Ilford until it closed in 1976); upstairs there was a display about the various resources available to research local history, including a section on the 1911 census. This highlighted a family who lived in Margaret Cottages, the houses demolished four years ago next to the Papermakers Arms, and this included a photograph from 1984 I hadn't seen before of Riverdene Road with Margaret Cottages being overshadowed by the Ilford factory, of which I made a thumbnail sketch.


The raised steps outside the doors of Margaret Cottages, something I’d noticed as being distinctive, indicated that the whole ground floor of the houses was raised to protect the properties from flooding by the nearby river Roding, with one notable flood occurring in June 1903, and another more recent one in 2000. Earlier in the day I had got down to the Roding at the end of Roden Street, between the flats built there, a development from a few years back now; I imagine this is all private land, but there was nothing to stop me getting alongside the railings bounding the river (on the other side, the A406 road essentially prevents access to the river for a long stretch). I had found a reference in Silver by the Ton to glass plates being dried in the open air by the river (presumably after cutting and cleaning, before coating); this stretch of the Roding also used to be known as the Hyle, from which Ilford is derived.

The Roding by Roden Street/Rollei 16 with Ilford FP4, develop before July 1975
I developed the FP4 Plus from the Bolex with D96; as there were three lengths, I developed one first, separated from the others, removing the tape from the joins so that these areas would also develop. The first length appeared thin, due to the D96 being close to exhaustion, so I increased the developing time of the second two, almost doubling it (the first length of film I’d developed for 10 minutes at 21ºC, the second for 18 minutes at the same temperature). One of these came out entirely blank, which must have been from the taped join here also getting stuck in the gate, and I had turned the film over in the camera at this point between exposing the first and second sides: out of two runs through the Bolex camera, only one taped join passed through the gate in one direction without getting stuck. I had tested this beforehand, but without doing this in the dark: it’s much easier to neatly tape a couple of lengths of film together when you can see what you’re doing. Once developed, it was clear that the frame spacing was more erratic than the previous test I had made on unperforated film, although the total running time would have been close to La Sortie de l'Usine Lumière à Lyon if all three lengths of film had gone through the gate. The still images were developed in Ilfotec LC29 at a dilution of 1+19, and I had rated the film at an exposure index of 40, which gave rather dense negatives.

Inverted negative showing irregular frame spacing

“The first camera in the history of cinema was pointed at a factory, but a century later it can be said that film is hardly drawn to the factory and is even repelled by it. Films about work or workers have not become one of the main genres, and the space in front of the factory has remained on the sidelines.”
Harun Farocki, ‘Workers Leaving the Factory’
Harun Farocki’s film Arbeiter verlassen die Fabrik (Workers Leaving the Factory) was made in 1995, the centenary of the Lumières’ first films, of which there was revival of interest, notably with the compilation film, Lumière et compagnie; Farocki’s film is a collage of cinema’s originary motif, culled from documentaries and features (“I have gathered, compared, and studied these and many other images which use the motif of the first film in the history of cinema, "workers leaving the factory," and have assembled them into a film”). In doing so it would appear that this film itself reanimated the subject, with the caveat that this is largely in the realm of the non-fiction film:
“In recent years, a number of remakes of the Lumière Brothers’ Workers Leaving the Factory have appeared. This particular Lumière film has become a touchstone for filmmakers in the past two decades, beginning with Farocki’s Workers Leaving the Factory, which compiles footage of workers exiting factories from many different fiction and nonfiction films, drawing our attention to how frequent and yet parenthetical or unexplored this visual image is in film history.”
Jennifer L Peterson, 'Workers Leaving the Factory: Witnessing Labor in the Digital Age'
Peterson’s prime examples are Ben Russell’s Workers Leaving the Factory (Dubai) from 2008, which clearly references the Lumières' film in its title and form, being a single long take of migrant workers leaving a construction site; Sharon Lockhart’s Exit (also 2008) which reverses the viewpoint of La Sortie de l'Usine Lumière à Lyon by placing the camera inside the factory gates looking out, filming the workers leaving an iron works on five successive weekdays in five unedited shots; and Daniel Eisenberg’s The Unstable Object (2011), which contrasts three different factories, from a technologically advanced car factory, to handmade clocks by visually impaired workers, and the traditional casting and finishing of cymbals. Referencing David Harvey, the theme of uneven geographical development is touched upon, especially in the contrasts in Eisenberg’s film, but also with the use of migrant labour in Russell’s Workers Leaving the Factory (Dubai); Lockhart’s Exit pictures a form of labour, once familiar to many, but increasingly outsourced from the global north.
“The title of the first film by the Lumière brothers (La sortie des usines, 1895) also prophetically describes the changes in working conditions that took place in the twentieth century.”
Volker Pantenburg, ‘Deviation as Norm—Notes on the Essay Film’
The site bounded by Roden Street and Riverdene Road can be taken as emblematic of changes from the end of the 19th century to the beginning of the 21st. Ilford’s Britannia Works did not start as a greenfield site, but literally as a cottage industry, expanding from Alfred Harman’s home to a rented cottage on the Clyde Estate and from there growing quickly during the very end of the 19th century into the beginning of the 20th. The factory incorporated social functions, with clubs, newsletters and such like, as evidenced by Mary Davis’ comments in the local museum. Without unnecessarily fetishising the solidarity of this form of labour, much of these functions have disappeared in the post-war decades. At the end of the 1970s, Ilford Limited moved away to Cheshire, and its other sites in Basildon and Brentwood were closed, consolidating production. The closure of Britannia Works in Ilford made possible the redevelopment of the town centre, the road scheme surrounding the site reflecting the increasing dominance of the private car in the 1980s, and the site moved from being one of production to a site of consumption with the arrival of the supermarket.

The title Workers Not Leaving The Factory alludes to two versions of ‘not leaving’: first, this is the site where a factory was, but is no longer, a simple temporal dislocation. At the time the Lumières demonstrated the Cinématographe in London, there would have been workers leaving the site each day (I could have waited until the supermarket closed at the end of the working day, but at 10pm, there wouldn’t have been enough light to film; I shot at lunchtime, appropriately, and the working patterns in grocery shops certainly do not include closing for lunch: in the shot on Roden Street shoppers are seen leaving the supermarket). Second, for many occupations, although not those physical, repetitious ones which typically take place in factories or on construction sites, obliquely seen in the film, work in the 21st century is never truly left behind when one exits the premises: the site of work is all pervasive in the digital realm. Of this kind of work, if 'the factory' stands in for work itself, then work is all around in a sense that the workers leaving the Lumière factory could never have conceived: once they had left the factory site, work had no call on them until they reappeared for their next shift.

Bibliography

All three versions of La Sortie de l'Usine Lumière à Lyon are on YouTube here.
The Regent Street Polytechnic Lumière Celebration programme (PDF) http://www.cineressources.net/ (retrieved 12/03/20)

David Campany, Photography and Cinema, Reaktion Books, London 2008 (2012 reprint)
Harun Farocki, Imprint/Writings, (English translation by Laurent Faasch-Ibrahim) Lukas & Sternberg, New York, 2001
Harun Farocki, Arbeiter verlassen die Fabrik (Workers leaving the factory), 1995 https://vimeo.com/59338090
David Harvey, Spaces of Global Capitalism: Towards a Theory of Uneven Geographical Development, Verso, London, 2006
RJ Hercock and GA Jones, Silver by the Ton - A History of Ilford Limited 1879-1979, McGraw-Hill, London, 1979
Joost Hunningher, 'Now showing at 309 Regent Street – Ghosts on ‘Our Magic Screen’. A screenplay' in The Magic Screen, Joost Hunningher, Rikki Morgan-Tamosunas, Guy Osborn and Ro Spankie, University of Westminster Press, 2015
Sharon Lockhart, Exit, 2008. Available online at www.ubu.com/film/lockhart_exit.html 
Volker Pantenberg, ‘Deviation as Norm—Notes on the Essay Film’ in Farocki/Godard, Amsterdam University Press, 2015 (https://www.jstor.org/stable/j.ctt16d69tz.7 retrieved 21/2/20)
Jennifer L Peterson, ‘Workers Leaving the Factory: Witnessing Labor in the Digital Age’, The Oxford Handbook of Sound and Image in Digital Media, 2013 (https://www.academia.edu/5728999/Workers_Leaving_the_Factory_Witnessing_Labor_in_the_Digital_Age retrieved 1/3/20)
Ben Russell, Workers Leaving the Factory (Dubai), (2008) Available online at http://vimeo.com/7528954
Ro Spankie, ‘The ‘Old Cinema’: a dissolving view’ in The Magic Screen, Joost Hunningher, Rikki Morgan-Tamosunas, Guy Osborn and Ro Spankie, University of Westminster Press, 2015
O. Winter, ‘The Cinematograph’, The New Review, May 1896 (https://picturegoing.com/?p=4166 retrieved 21/3/20)

Monday, 3 February 2020

127 Day January 2020

Baby Ikonta with Ilford FP4
I observed last week's 127 Day by shooting a roll of film with the Zeiss Ikon Baby Ikonta, cut-down Ilford FP4 Plus rolled with 127 backing paper. I had time for a few shots during a lunch break at work, although light levels were very low, then finished the roll at home later with a couple more frames. Had I thought about the results in terms of the flat overcast light, I might have given the film an extra stop in development; as it was, I was using a new developer to me, D96, and the negatives, possibly not especially well exposed in the first place, appeared a little thin and flat, representative of perhaps feeling underwhelmed and uninspired. I did however take some photographs of the fence around the local estate, constructed from repurposed second world war stretchers, surplus after the war, which I had been meaning to do for some time; these feature in Patrick Keiller's film London.

Baby Ikonta with Ilford FP4
Baby Ikonta with Ilford FP4
Baby Ikonta with Ilford FP4
Baby Ikonta with Ilford FP4
Baby Ikonta with Ilford FP4
Baby Ikonta with Ilford FP4
Baby Ikonta with Ilford FP4

Friday, 19 July 2019

127 Day Summer 2019

Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film
After my recent testing of the Rolleiflex 4x4, I naturally wanted to use it on last week's 127 Day; I didn't have any film in medium format to cut down to 127 to use on the day itself, as I might normally do. However, in cutting down 120 film to the width of 127, as the film is also longer, there's always an offcut of three or four frames, depending on the frame size of course; I did have one such short roll of Ilford FP4 Plus, which I simply shot the same scene over three frames with bracketing.

Rolleiflex 4x4 with Ilford FP4 Plus
I also shot the roll of Kodacolor II which had originally come with a Kodak Brownie 127 and which I hadn't previously used: I had low expectations for this film considering its age and that the roll of Agfacolor Special which also came with the camera and that I had short for last year's Summer 127 Day had only yielded one poorly defined image (I might have used the Kodacolor II film then had I not broken the camera). Using the Rolleiflex 4x4 did mean that I could give the film much more exposure than that of the Kodak Brownie 127 which has a single shutter speed and aperture, and so I used a tripod and bracketed exposures, erring on the side of considerable overexposure - which did provide better results than I had achieved with the Agfacolor film twelve months ago.

Rolleiflex 4x4 with Kodacolor II
The metal spool that the film was on was rusty, and the backing paper was partially stuck to the film, although this seemed to be mostly on the reverse of the film, not the emulsion side, and could be gently rubbed off in the wash. I used stand development with the film to get a black and white negative image, successfully for a few frames, although in comparison with the image above, the one below is out focus in the central area, suggesting that film flatness was a problem, perhaps unsurprising given that the film itself had been tightly coiled around the 127 spool for forty years.

Rolleiflex 4x4 with Kodacolor II
Most of the photographs that I took on the day were with Kodak High Resolution Aerial Duplicating film cut down by hand to 127 size. This was rated at an exposure index of 2, and, having a lot of the film to play with, I also bracketed most of the shots, partially for exposure, but also, shooting long exposures on the shutter's B setting (again with a tripod), I was aware of either the possibility of inadvertent shake from holding the shutter release down (which is one reason for liking older shutters with a T setting), or from the breeze causing elements of the subject to move. As well as being very slow in terms of exposure, the Kodak High Resolution Aerial Duplicating film is also high contrast and blue sensitive, making for an interesting comparison with the black and white version of the Kodacolor II film; the shot below just holds some information in the sky, but essentially bleaches it. Other colours render in very different ways on the film: in the image at the top of the blog, the apples, although far from ripe, are a russet colour, which appears notably dark in the photographs. The look is quite different from the usual panchromatic rendering of most black and white film, and has a distinct feel, even when used for subjects where this effect isn't quite so clear. One of the problems I had when using the Kodak High Resolution Aerial Duplicating film straight after the Kodacolor II film is that there was a fair amount of dust in the camera caused by the rust from the metal spool, which caused a fair bit of spotting on subsequent frames, particularly at the edges from the spool flanges. The grain of the Kodak High Resolution Aerial Duplicating film is so fine as to be virtually invisible, at least within the scope of using a flat bed scanner with the film and this shows how well the Xenar lens on the Rolleiflex 4x4 performs: apart from the spotting - some of which may be due to development - the film's grain is so fine that there is a danger of banding in areas of smooth tonal transition, a problem I've only really experienced before with Kodak Technical Pan.

Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film
Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film
Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film
Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film
Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film
Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film
Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film
Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film

Friday, 12 July 2019

Rolleiflex 4x4 - the 'Grey Baby' Rolleiflex

Rolleiflex 4x4
From the Rolleiflex 6x6, which from the beginning set the pattern for the development of the twin-lens reflex camera, the Rolleiflex 4x4 has taken the basic principles of its construction.
Rolleiflex 4x4 manual
On top of being given old cameras, with something of a reputation for them, occasionally I am lent them: one such borrowed camera I have been testing recently is the Rolleiflex 4x4, a 127 rollfilm format twin-lens reflex camera from the 1950s. The camera still has its original dual-lens cap and strap, missing its clam-shell ever-ready case, and has clearly been well used, the grey leather panels wearing down to its natural colour. Inside the camera back is a dealer decal reading 'Foto-Krischker Tirschenreuth', Tirschenreuth being a small town in Bavaria close to the Czech border.

The Rollei Club website has a detailed page on the evolution of the Rolleiflex 4x4. The initial version of the camera was introduced in 1931, combining the innovations of the larger original Rolleiflex with the increasing popularity of smaller format cameras such as the Leica, amongst others, and developed through the 1930s to the early 1940s - and then brought back in 1957 with the distinctive grey leather inset panels and painted metal trim. The 'Grey Baby' or 'Baby Grey' Rolleiflex inspired a number of Japanese-made 127-format twin-lens cameras such as the Yashica 44, Primo Jr, and the Waltz Automat 44, often in grey. The grey version of the Rolleiflex 4x4 had a much larger production run than any previous model, over 60,000; it was superseded by a final black version with the same specifications from 1963, in much smaller numbers - less than 5,000, and finally discontinued in 1968. All versions of the camera were simply called Rolleiflex 4x4 by Franke & Heidecke/Rollei, but with codes for internal use: the final camera, whether grey or black, is the K5 model. However, the Rolleiflex 4x4 is colloquially and commonly known as the 'Baby' Rolleiflex, although never officially named as such; by contrast Zeiss Ikon adopted the 'Baby' prefix for their 127 cameras based on larger original versions, such as the Baby Box Tengor. Perhaps, unlike Zeiss Ikon - catering for all pockets - aiming at a wealthier customer Rollei disdained the colloquialism of the word 'Baby'.

Rolleiflex 4x4
The Rolleiflex 4x4 cameras are as well designed and constructed as the larger 120 cameras, and with similar specifications. Pre-war Rolleiflex 4x4s all had Tessar lenses; the post-war model features a Schneider-Kreuznach Xenar f3.5 lens with a focal length of 60mm (the serial number of this particular camera's lens dates it to 1958, fairly early in production); the viewing lens is a faster Rollei Heidosmat f2.8. The lens will focus down to 1 metre, and the focus knob has a depth of field scale around it and includes a film speed reminder for ASA and DIN. The shutter is a Synchro-Compur with speeds from 1-500, plus B. There is flash sync with a PC socket and a switch for electronic flash or flash bulbs which also has 'V' for the self timer. There is a small button underneath the shutter surround to change this switch. The threaded shutter release is angled upwards and slightly out from the body under the taking lens.

One feature of the Grey Baby Rolleflex 4x4 which firmly locates it as a 1950s-designed camera is its coupled LV (Light Value) system. Aperture and shutter speeds are linked together, so a number of combinations of the two can be selected which will give the same effective exposure. Many cameras during the 1950s and 60s used such systems before this fell out of favour; most contemporary commentators online seem to conceive of the LV shutter-aperture linkage as a solution to a problem that barely exists. On one side of the taking lens the LV numbers run from 2 to 18 with a dot to indicate the selected number; the other side of the shutter has the aperture and shutter speed settings.

Rolleiflex 4x4 aperture and shutter speed selectors
The aperture ring has a raised section with a grip which needs to be depressed to turn this separately from the shutter speed section in front: on the other side of the shutter this moves the red dot in relation to the LV numbers to select the exposure; it is possible to select intermediate aperture stops.
The back of the camera has a detailed exposure guide, essentially a sophisticated version of the 'sunny 16' rule, with subjects and lighting conditions, which, when correlated with film speed and adjusted for time of day, produce a number to set on the LV scale of the shutter.

Rolleiflex 4x4 exposure guide
One final observation about the LV scale worth noting is that the shutter has a series of numbers picked out in green beyond the 'B' setting, representing whole seconds for calculating long exposures (as the shutter has 1 second as its lowest speed, the 'B' setting actually represents 2 seconds on the LV scale).

Rolleiflex 4x4 viewfinder
Opening the lens hood reveals the ground glass screen viewfinder with a subtle grid to aid composition; pushing on the front of the viewfinder hood flips up a magnifier to aid focus; pushing the front through until it locks down converts this into the sports finder. The magnifier can be slipped out to replace this with corrective lenses to compensate for eyesight; pushing in the hinges on either side of the hood collapses the whole. The viewfinder has parallax compensation, though on examining the camera it isn't obvious how this is achieved, but possibly through a subtle movement of the focus screen, not dissimilar to the parallax compensation with the Rollei 16.

Opening the camera, the base around the tripod mount has a rotating lever, turning anti-clockwise, to push forward the hinged latch which, when flipped, allows the whole bottom and back to be lifted upwards opening the camera to load the film. Film travels from bottom to top in the camera, both spool holders flip out in different ways to enable loading and unloading. The frame counter is entirely automatic, without a red window. Once loaded and closed, the film is advanced until the numeral 1 appears in the counter window and the advance knob stops until the shutter is released; the shutter release is locked when the viewfinder hood is down. Without a film in the camera, the counter shows '0' and the shutter can be cocked by turning the advance knob and released as normal. The pre-war Rolleiflex 4x4 cameras had an advance lever, but the post-war version has a knob instead (many of the Japanese 4x4 TLR cameras did have advance levers however), more like the contemporary  Rolleicord cameras, yet the 4x4 retains the Rolleiflex name.

Rolleiflex 4x4 - back open
With the back open, two small levers to the right of the film window can be seen. One appears to be a feeler for the film; the second appears to be a lever that, when released by opening the back, resets the film counter. When first testing the camera, the shutter seemed to stick at all speeds; after thinking that this was simply the fact that, after sixty years, the shutter needed to be stripped down and cleaned, I moved the flash sync switch to the bulb position - and the shutter works as accurately as one might expect, even at slow speeds. Evidently the electronic flash sync seems to conflict with the shutter mechanism and as this hasn't turned up in searching for shutter problems, so this might just be an idiosyncratic issue with this particular camera.

Rolleiflex 4x4 with Ilford HP5 Plus
With the first roll of film through the camera (a short off-cut of cut-down Ilford HP5 Plus), the qualities of the Rolleiflex 4x4 are immediately apparent. The 127 rollfilm format - in all its standard frame sizes, 6x4, 4x4, and 3x4 - provides larger images than the standard 35mm frame; set against this is the fact that many, if not most, cameras designed around the 127 format tend towards the cheaper end of the consumer market, inevitably not fully taking advantage of the larger negative area. In the image above (which could of course be shot on finer-grained film than HP5 Plus) the sharpness of the Xenar lens is clear despite the nondescript subject matter. The camera sits well in the hand, perhaps easier to operate than larger 120 format camera, supported by the right hand, focus by the left, the shutter release positioned to be operated by the right thumb, and switching support from one hand to other to advance the film simple enough.

Rolleiflex 4x4 with 35mm Ilford Pan 100
As well as medium format film cut down to 127, I also ran a roll of 35mm Ilford Pan 100 through the camera and found that all the frames were out of focus in the centre; the image above was one of the more in-focus frames. Having used 35mm rolled with 127 backing paper previously, I was surprised to find this happen with the Rolleiflex, although I have had similar issues when using 120 film with 116 backing paper, as the smaller width of the film is not supported at the sides with the result that film flatness suffers. However, the 116 frame is nearly three times longer than the nominal 4x4 size with the Rollieflex 4x4. Other 127 cameras seem to be better at this, with the V. P. Twin possibly being the exception, but not consistent. When using the camera with cut-down medium format film and 127 backing paper, the main problem that cropped up was that the first frame did not align correctly with the start of the film, resulting in half an image with the tape visible; this may be down to the film not being taped to exactly the right position on the backing paper.

The Rolleiflex 4x4 is clearly one of the most sophisticated 127 format cameras ever made; some of the Japanese 4x4 TLR cameras do have light meters, the only feature that could be thought of as lacking from the Rolleiflex. This last iteration of the Rolleiflex 4x4, coming at the time that cameras began to feature built-in light meters, was perhaps popular enough at the height of the late 1950s 4x4 twin-lens reflex craze for there to be little impetus to develop the camera any further. As with other Rollei cameras, there is an attention to detail in the construction and manufacture that occasionally feels like over-engineering, but solid enough to inspire confidence and small enough for portability, perhaps able, briefly, to compete with the sophisticated 35mm cameras of their time. As a result, the Rolleiflex 4x4 is still an eminently usable 127 camera, continued access to 127 film notwithstanding.

Rolleiflex 4x4 with Kodak High Resolution Aerial Duplicating Film
Rolleiflex 4x4 with Ilford FP4 Plus
Rolleiflex 4x4 with Ilford HP5 Plus

Sources/further reading:
The Rollei Club on all Rolleiflex 4x4 models
Rolleiflex 4x4 manual (PDF file)
Baby Rolleiflex on onetwoseven.org
The Baby Rolleiflex on Camera-Wiki
Rolleiflex 4x4 on Mike Elek's Classic Cameras
127 film and the Rolleiflex 4x4 Rollei Users' Club
Anthony J. Oresteen - Using the 1957 Rolleiflex 4x4 "Baby" Models