Showing posts with label Butchers and Sons. Show all posts
Showing posts with label Butchers and Sons. Show all posts

Sunday, 27 January 2019

#FP4Party January 2019/Revisiting the Butcher's "Cameo"

Ilford FP4 shot on Ilford FP4 with Butcher's Cameo and close up lens attachment
When choosing a camera for January's #FP4Party, a clear deciding factor for me was already having a fair stock of quarter-plate (8.2x10.8cm) FP4 sheet film. With one part or mostly used box of 50 and one unopened box, I decided not to buy any new rolls of FP4 and use this instead. Both boxes have a handwritten date of 16/11/78 (one box looks like it starts with 17/- which was then changed to 16); the film dates to well before the 'Plus' iteration was introduced in 1990 but I've previously used it with just one stop of extra exposure to compensate for age (I have also shot it at an exposure index of 100, and pushed the development by one stop instead). Possessing three cameras for the format: the Klito, Midg, and Cameo, all plate cameras, all of a similar age, over a hundred years old, I picked the Cameo, having used it for the first #FP4Party in September 2016, being the smallest and lightest of the three, and it seemed time to revisit it for this month's #FP4Party.

Butcher's and Sons "Cameo"
I restricted myself to expose just two sheets a day over the 'shoot week' (although on the first day I actually shot three sheets; I also didn't count the shot of the FP4 box in the total, but it made sense to photograph this on the film itself, using the lens attachment, during shoot week). Low light and short daylight hours in the northern hemisphere in January do not make for using a film rated at an exposure index of 50 necessarily sympathetic. In addition, using the Cameo handheld is not without a number of difficulties. Not entirely trusting the focus scale on the drop bed, to focus the camera using the ground glass screen requires one to use the spring clamps to position the front standard at the correct distance on the rails of the drop bed: it needs a certain amount of dexterity to put one's hand in such a way to move the front standard without obscuring the image on the ground glass with it: I miss rack-and-pinion focussing with the Cameo, particularly when using it hand-held.

Home-made ground glass screen; lens wide open
Even in relatively bright light, the Cameo's Beck Symmetrical lens produces a dim image: its widest aperture is nominally f8 (although it's most likely f7.7 when fully open beyond the f8 mark), slow by modern standards, and the screen is missing its hood to shade the ground glass, making this image difficult to assess. The ground glass was missing from my camera when I acquired it; I replaced this with some glass that I ground myself, but used too coarse a grade of grit, which adds to the difficulty in focussing. Once the image is in focus (as close as one can tell) on the ground glass, one then has to remove the focus screen and replace it with a plate holder, adjust both aperture and shutter speed to the desired settings, remove the darkslide from the plate holder, then frame the subject using the brilliant finder - and then gently press the shutter release lever. The Lukos II shutter has three 'instantaneous' speeds of 1/100th, 1/50th and 1/25th, and, while it would have been possible to get usable exposures at 1/25th, wide open on f8, for overcast, dull days, I only used the Cameo hand-held on a couple of days (Tuesday and Friday) when there was some winter sun, partly to use smaller apertures in the hope that a greater depth of field might compensate for any errors in focus.

Brilliant finder on the Cameo
For most of the shots during the week, I used a tripod or simply balanced the Cameo on a flat surface for long exposures, low-light shots, interiors and those at night. I also used the wide angle/close up lens attachment for some shots (Friday and Saturday) and the image of the box itself. I did my first batch of development during the shoot week rather than the 'development week' that followed. This acted as a check on my exposure and development regime: the first batch of film I developed with a one-top push - on top of the one and a third stop extra exposure - but developing the first few sheets appeared to show that extra development was unnecessary and the rest of the week's shots were developed in RO9 One Shot for the recommended time, 9 minutes, at a dilution of 1+25 at 20ºC.

Revisiting the Cameo, the quality of the results from the shoot week varied. Some of this was down to user error of course; other aspects were to do with the camera's limitations. When using the wide angle/close up lens attachment, there is clear vignetting, with a falling off of both illumination and definition towards the edges of the frame. This is less obvious when used as a close up attachment, as the lens' image circle would be wider the more the bellows are extended; when used as a wide angle attachment, the bellows are extended less than normal, making the image circle smaller. As well as the difficulties of focus set out above, there were also problems with film flatness (notably visible in the middle of the shot from Saturday); this might be due to the motley group of film sheathes I've been using, with some clearly home made, and others professional: some fit the sheet film better than others. The film itself stands up remarkably well: over four decades old, with only a little loss in sensitivity, the quarterplate-sized FP4 is still very usable.

Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday

Friday, 23 September 2016

Butcher's "Cameo"

The "Cameo"
Sometimes I acquire cameras almost by accident. After using the Ensign Folding Klito earlier in the year, I bought another quarter-plate format folding camera as it came with a full complement of a dozen plate holders, and probably would have paid around the same amount for the plate holders on their own. However, these metal holders were not compatible with the Klito: the Klito holders have a single 'lip' on the left and right edges and none at the bottom. These particular holders in comparison have a double lip at both sides with a single lip at the bottom edge which meant that they were not interchangeable. It's an issue not uncommon for early plate cameras, as many manufacturers had their own propriety designs, especially it seems around the turn of the century; only later was there a degree of standardisation amongst different camera makers.

Cameo with plate holders and supplementary lens
The camera that these holders came with was a Butcher and Sons Cameo (on the camera itself is a small brass name badge with The "Cameo").  I've already written about Butcher and Sons in discussing the Midg: their cameras were made in Germany and then badged and sold by Butchers - with most likely some other elements of finishing by Butchers, notably that the Cameo has a British-made lens in a German shutter. The camera itself was almost certainly made by Hüttig, or Ica - of which Hüttig was a constituent when Ica was formed in 1909: the 'Cameo' is listed as a plate camera under the Hüttig page on Camera-Wiki, but does not appear as a 'continued model' on the Ica page, although this may just be an omission (however, the Cameo also does not appear under the comprehensive Ica cameras list on From the Focal Plane to Infinity).

Research online turned up scans of a Butcher and Sons catalogue from 1914, which was invaluable for precisely identifying the model. There are four versions of the Cameo listed: my camera corresponds to the Model O, surely a back-formed name: the others are named with Roman numerals I, II and III (the 'Uno-Cameo'); the O is a simpler, cheaper version. It does appear to be named with a capital 'O' rather than a zero, although whether anyone referred to it as a "Model-Oh" seems unlikely. To add a small amount of confusion, the Model O is divided into five variants based on lens and shutter combinations: my example is the middle of the range Model 03 (the other Cameos, although having a wider variety of sizes, lenses and shutters are not burdened with a further model name in the catalogue). The catalogue states that "The Model O "Cameo" has for fourteen years held the lead as the most serviceable, most practical, and most valuable Guinea Folding Pocket Camera on the market, and for this reason has become famous the wide world over. The 1914 pattern has been entirely remodelled, and is now as perfect as is possible to make it." As an importer of cameras from Germany, the outbreak of war that year was significant: it resulted in Butchers forming a partnership, and then an eventual merger, with Houghtons in order to stay in business.

Cameo in landscape orientation
The Cameo itself is a fairly well-constructed example of a typical plate camera of its time: leather-covered wooden body, with a metal drop bed, removable wooden back for the ground glass screen, originally with a hood, missing on my version. It has a large brilliant finder, without a spirit level. It also lacks a wire frame finder, which I prefer for shooting handheld. The bellows are single extension only, and focus eschews a rack and pinion device for the simpler expedient of using the spring clamps, as the catalogue names them, to advance the front standard along the runners. There is a focus scale with an infinity lock, but for precise focusing, this is rather more difficult as I found my hand partly occluding lens as I attempted to move the standard into place. As well as a hood, my camera was also missing the ground glass screen itself, so I made a replacement, although I used too coarse a grade of grit to see the projected images very clearly (incidentally, to make the replacement screen I had to cut down a glass plate for this, as the screen is smaller than quarter plate size). Camera movements are limited to front rise/fall and cross, like most folding plate cameras of this age. The body also has standard tripod sockets for vertical and horizontal orientation.

Beck Symmetrical lens in Lukos II shutter
The Beck Symmetrical lens has a mark for f8 as its widest opening on the scale, but the aperture opens a little wider, as shown by the pointer's position in the image above, possibly just to f7.7. It does have a chip or crack at the very edge of the front element, but this probably has a marginal effect on image quality. The lens is set in a Lukos II three-speed shutter, with 1/25, 1/50, 1/100, with T and B. The Lukos is an 'Everset' shutter, meaning that it doesn't need a separate lever to cock the shutter before firing, but the tensioning of the mechanism can be felt in initially pressing down on the release lever before it reaches the firing position. According to the 1914 catalogue, Lukos shutters were specially made for Butchers - although not specified, no doubt by Ica.

Having made a new ground glass screen and submitted the camera to some general cleaning and renovation, an excuse for shooting with the Cameo came with the announcement on Emulsive of the first #FP4Party. In one of my job lots of old film and plates, I'd acquired two boxes of 8.2x10.8cm FP4 from the 1970s: with 50 sheets to a box I was happy to sacrifice a few sheets to test the camera, and having used some 4x5 inch FP4 from the same source successfully, without testing the film itself. I shot half a dozen sheets at half box speed and used developing times for modern FP4 Plus - the sheet film being the previous iteration of Ilford's FP emulsion before the 'Plus' version.

Cameo with expired Ilford FP4
Cameo with expired Ilford FP4
As well as the FP4 film, I also shot some glass plates at the same time. Thirty years older than the FP4, I shot some Ilford Soft Gradation Panchromatic plates, dated to 1946, hand held, with the result that most were underexposed given the Cameo's slow lens. The plates would have been better for an extra stop or two, but the results are still good for a seventy-year old emulsion.

Cameo with Ilford Soft Gradation Panchromatic glass plate
Without a spirit level or a wire frame finder, I had trouble keeping the camera level when shooting, and as a result, I have cropped some of the FP4 images, although with the glass plates the qualities of their distinctive edges would be lost, so I kept the scan of the whole plate, as above, despite the slanting horizons.

Cameo with No.6 supplementary lens fitted
Included with the Cameo camera was a push-on supplementary lens, with little information to identify it, marked simply 'No.6'. Fitting it to the camera showed it to be for close up and wide angle use, the former mitigating the camera's limited, single bellows extension to get closer to a subject, the latter simply facilitated by placing the front standard a little closer to the camera body. With the supplementary lens it's critical to use the ground glass screen to focus, as the focus scale on the body no longer applies; for wide-angle work, the brilliant finder shows a slightly smaller angle of view, but using the finder itself isn't especially exact, so this matters little. The two images below show the difference with and without the supplementary lens, which isn't especially dramatic.

Cameo with No.6 supplementary lens and expired Ilford FP4
Cameo with Soft Gradation Panchromatic glass plate
The difference when used for close up photographs appears more marked, with the two examples below both shot on Ilford G.30 Chromatic glass plates. In each case, the front standard of the camera was advanced as far as possible on the runners, right at the very edge of the folding bed.

Cameo with Ilford G.30 Chromatic glass plate and No.6 supplementary lens
Cameo with Ilford G.30 Chromatic glass plate
Although not used for any of the photographs in this post, the Cameo also came with two exposure meters of a very specific kind. The two wallet-like items are actinometers and work by timing how long a piece of sensitised paper takes to darken to a specific tint; that time is then applied to the calculator, which is calibrated to emulsion speed in Hurter and Driffield numbers. Possibly around a hundred years old, I found that the sensitised paper still darkened when exposed to light; some of my old glass plates are rated in H&D numbers, but most of the photographs in this post were shot with the 'sunny 16' rule rather than metered (I used an SLR to meter the close up shots and overexposed most of them).



Imperial Exposure Meter showing sensitised paper strip and sliding calculator
A century ago, the Cameo would have given quite adequate results on glass negatives for photographs that would have mostly been printed by contact. The Beck Symmetrical lens is sharp in the middle, but definition falls off towards the edges at wider apertures, and for some of the reasons I've mentioned, the Cameo isn't the easiest plate camera I've used: contemporary to my camera, more expensive models in the range with better, faster lenses, double extension bellows and rack and pinion focussing would be more desirable - if one were to make an informed purchase.

Butcher's Cameo sample image with Ilford FP4
Butcher's Cameo sample image with Soft Gradation Panchromatic glass plate
Butcher's Cameo sample image with supplementary lens and Soft Gradation Panchromatic glass plate

Sources/further reading:
There's perhaps surprisingly little in depth information about the Cameo online, although presumably sold in tens or hundreds of thousands, this may be simply that it's not considered sufficiently interesting in any way.
1914 Butcher Catalogue
'Pocket' Cameos on Historic Camera
Early Cameo model on The Living Image

Tuesday, 28 July 2015

The "Midg" Falling Plate Camera

The "Midg." Falling Plate Camera
"It may be worth recalling that in those days hand cameras were called detective cameras, due to a popular belief that they were used by the police in the detection of crime. They used 1/4-plates (then thought small) held in sheathes and changed by a bag, or by a mechanism that could be relied on to jamb [sic] at critical moments. Serious workers and really nice people would have scorned to be seen with a hand camera."
Letter to Miniature Camera Magazine, September 1937
The introduction of the dry gelatin photographic plate was one of the most important factors in the mass popularisation of photography, soon to be followed by the innovation of film itself. The technology immediately preceding, the wet plate, had the distinct disadvantage of sheets of glass needing to be coated, shot and developed all within a very short time. The new dry plate could be coated with photographic emulsion and then stored until use - and stored again until development. Additionally, with time no longer a critical factor, both coating and development of the glass plates became two operations that a photographer could delegate to specialists. The convenience of the dry plate resulted in new forms of cameras being introduced to take advantage of this technology. In the quote above from Miniature Camera Magazine, the writer is recalling his experiences of photography in the 1890s, in contrast to the cameras of the 1930s: the magazine was dedicated the 'miniature' formats of 127 and 120 rollfilm, and 35mm. The 'detective cameras' referred to are a form of box camera: the nomenclature appears to have been used to contrast these against the typical whole- or half-plate 'stand' cameras of the time, wood and brass bellows cameras normally used on a tripod. Although by no means small, the detective camera, usually a leather covered box camera, would have appeared a relatively unobtrusive piece of equipment. As the letter describes, these were cameras which carried a magazine of plates, sometimes changed by a bag attached to the camera, or by a mechanism allowing a series of plates to be exposed and then stored inside the camera. A common version of this was the falling plate type: glass plates (or, in a few cameras, sheet film) either fell into place to be exposed, or, as was more common, fell out of place once exposed. Unlike stand cameras with separate single or double plate holders, the magazine camera had the convenience of holding (usually) a dozen plates at a time and could be used hand-held.

The Midg (sic) was one such camera, popular in Britain at the start of the 20th century. The small round badge between the viewfinder lenses has its name written as The "Midg." - complete with double inverted commas and full stop. It was sold by Butcher and Sons, which would later join with Hougtons and eventually become Ensign. The name suggests a small camera; its dimensions are 18.5 x 21 x 10.5cm, making it very large when compared to rollfilm box cameras of the same period or slightly later. There were a number of models of the Midg, some with focussing lenses, some with front movements. My camera has neither, so would appear to be a No. 0, likely a back-formed model number after new, more advanced, Midg cameras appeared; the f8 lens would place its date from 1905 onwards; earlier cameras had slower lenses.

Although badged by Butcher and Sons, the camera itself would have been made by another company, not an uncommon practice. The Living Camera Museum entry for the Midg states that it was "probably made in Germany"; Grace's Guide gives the following useful entry:
1915. Houghtons Ltd and W. Butcher and Sons Ltd formed a joint venture Houghton-Butcher Manufacturing Co Ltd to share manufacturing facilities. This agreement was essential for Butcher, which had no manufacturing plant and was mainly trading imported German cameras before the outbreak of World War 1. The two companies continued to trade separately, and the camera designs remained distinct. [my emphasis]
As many of these falling plate cameras were designed along very similar lines, it is by no means easy to discover the original manufacturer of the Midg purely by comparing images of cameras online (it is possible that the Midg was made exclusively for Butcher, but far more likely it would also have been sold under another name in Germany). However, according to Camera-Wiki, Butcher did sell cameras by Huttig, notably the Gnom and the Aviso as the Little Nipper, so it may just be possible that the Midg was another Huttig camera (it also mentions Ica, but not any specific models). The Midg first appeared in 1904 (Early Photography gives c.1903 as the date), and was still being advertised in the early 1920s. Generally, the magazine camera as a type was popular from the 1890s to around the time of the first world war; the Midg itself has a small role in popular culture thanks to the Cottingley Fairies hoax. For the first photographs in 1917, Elsie Wright and Frances Griffiths used Elsie's father's Midg; once these images had become famous, the girls were given Cameo cameras in 1920 to take more photographs, moving from falling plate to folding cameras, and in doing so perhaps demonstrating the decline in use of the falling plate camera.

The Midg is a quarterplate magazine camera and takes twelve glass plates in metal holders. As photographic plates were usually sold in one-dozen packs, it would be possible to load a whole pack of plates at a time. The image below shows the back of the camera opened: the bolt mechanism on top of the camera releases each exposed plate to fall into the bottom of the camera. This also has a small round window which shows numbers 1 to 12 as the plates are advanced; this has to be manually set. Plates from the bottom of the camera can be removed (in the darkroom) while unexposed plates are still in position. Some falling plate cameras had split backs for this purpose, but as the Midg has a separate pressure plate this is not necessary (in some cameras, the spring was fixed directly to the inside of the camera back).

Back opening showing pressure plate and plateholders
Back opened to show spring mechanism
The metal holders are removed from the camera for loading and unloading. To load the camera, these are placed on two rails, just visible in the image above. The holders, below, have two pins at the bottom, which are positioned under the rails when loading, before the pressure plate and spring are then closed, along with the camera back. Along one side of the holders are holes, in groups of three, a marking which numbers the plates on exposure from one to twelve. My camera was missing two holders (numbers 3 and 11).

Midg plateholders showing edge markings
Inside the camera when I received it, the plateholders were loaded with glass plates: six of these were blank, unexposed, but four of these had negatives inside. Leaving aside the question as to why the negatives had been reloaded into the camera, it was clear - due to the markings on their edges - that these pictures had been shot with this same camera. The negatives all looked overexposed with uneven patches of fogging, probably from light leaks. I made contact prints from the negatives, three of which showed the same woman, one joined by a man, below, and the fourth with the some flowers - perhaps the same flowers seen in the photograph below.

Negative found inside the camera
The lens is an f8 Primus Rapid Symmetrical lens, essentially a Rapid Rectilinear design, stopping down to f32 (when cleaning the camera, I removed the plate around the lens and found the back of it with aperture markings engraved down to f44). The lens is fixed, but is provided with three supplementary close-up lenses. The pointer underneath the lens rotates these into place behind the front lens element for pictures at distances of 9, 6, and 3 feet (the position without these supplementary lenses is marked 'open' rather than infinity). This does mean that there is no intermediate focussing, and in use, I found these distances were not very accurate; other versions of the Midg have distances of 4, 8, 12, feet, which from my results when using the 6 and 3 feet settings, felt as though these distances might be more realistic.

Shutter adjustment instructions
The shutter appears to be an everset self-capping, sector type. An arrow beside the lens is switched to either T for 'Time' or I for 'Instant' settings. On I, shutter speeds are set on a dial, from 1 second, through 1/2, 1/4 1/10, 1/20, 1/50, 1/75, to 1/100. Inside the camera back is a pasted notice about adjusting the shutter tension, from which I inferred that possibly the shutter works with intermediate timings when set between speeds. The shutter release is a lever on the side of the body which has a simple lock position.

Midg finder showing laterally reversed image
Framing is achieved by two large (and surprisingly clear) viewfinders with laterally reversed images. Before using the camera, it needed a good deal of cleaning, having a smell about it of many decades in an attic. In cleaning, I removed most of the metalwork from the body, including the plate changing mechanism itself. This fits into a rather roughly cut section of the wooden top to the camera. The metal frames of the viewfinders were simply fixed by panel pins into the wood. Although there was a small amount of corrosion on the mirrors, once cleaned these provide the best images I've seen on viewfinders of this type. The hand strap had been replaced by a home made version at some point - the underside has an embossed line bearing no relation to its shape, obviously cut from a larger piece of leather. In renovating the camera, I didn't attempt to take apart the shutter. This fired, but stuck at slower speeds. I attempted to adjust it as described by the notice inside, but this made no difference; possibly at 1/100th it is accurate. I did shoot a couple of images at 1/100th 'wide' open at f8, but these were quite underexposed.

Having used old, previously unexposed photographic plates successfully in the past, obviously I wanted to use the Midg to shoot glass plates; I had seen a few examples online of these cameras being used contemporaneously with film or paper, but none shot with actual glass plates. For the first photographs with the Midg, I chose a box of Ilford Soft Gradation Panchromatic plates. I've shot a number of these plates in different sizes from the 1940s through to the 1960s with almost universally good results. This particular box had a 1930s-1940s style label but unlike many other boxes of Ilford glass plates, although it was sealed, there was neither a label under the wrapping with developer formula and a date code, nor a separate leaflet inside to date it more securely. I rated the plates at 25, and, except for one underexposed image, I used a tripod and the T setting for all the shots. As a result, I mostly used apertures of f16-f32 to provide exposures of 2-10 seconds, easier to achieve manually, than trying to get a 1/2 or 1/4 second. I also used a yellow filter for many of the shots: as well as providing definition to the skies, this also functioned as a neutral density filter, giving longer exposures, again, making it easier use the shutter on its T setting.

Ilford Soft Gradation Panchromatic plate
Ilford Soft Gradation Panchromatic plate
I shot some plates with the camera in a vertical position; using the camera horizontally, after exposing the plate above, I tried the plate advance mechanism, only to find that, although the spring pushed the plate forward and released it, while horizontal, the plate didn't drop in to base of the camera cleanly, and, even with some shaking about, it got stuck at an angle. This showed up in as a shadow across the corner of the next plate exposed (below), and I was not able to advance this plate to take any more photographs. This was very much what I expected might happen - and I could have confirmed this without potentially wasting a glass plate - however, given the dark area at the top of the affected plate below, the top left corner being occluded in this way is not especially distracting. After this, when shooting horizontal images, I turned the camera back to its vertical orientation before advancing to the next plate.

Ilford Soft Gradation Panchromatic plate
The camera is designed to hold the plates in place once these have dropped into its base by two sprung metal runners in the front, which have six pairs of protruding notches, made to secure two exposed plates at a time, as in the image below; the door of the camera has an angled profile that fits underneath the pressure plate, as can be seen in the photographs further up in this post, to ensure, once exposed, the plates are do not move around inside the body of the camera, even if the camera is turned upside down.

Camera interior showing notched metal springs
Having shot a whole box's worth of Ilford Soft Gradation Panchromatic plates, I wanted to try some different glass plates. Having three as-yet unopened boxes of Kodak P1200 Super Panchro-Press plates from the 1950s, I loaded a few holders with these, and shot them at the same time as some Ilford F.P.3 sheet film. However, when it came to developing the Kodak plates, opening the tank once these were in the fixer I could see the emulsion lifting off the glass. None of the plates had the emulsion detach completely, so this was an extreme example of what is known as 'frilling'; the plates also had patches which look like mould obscuring the images on the negatives, which are just discernible, but the difference from the Ilford plates is very marked.

Kodak P1200 Super Pancro-Press
As well as glass plates, I also wanted to shoot some film with the Midg. I already possessed a number of film sheaths in the quarterplate size, and some, but no means all, of these fitted into the Midg's plateholders. I have read about falling plate cameras needing the weight of glass to provide the impetus for the plate to fall once released, but in the Midg, the plateholders happily fall into the bottom of the camera while empty, so using film instead of glass plates did not cause any difficulties. I first shot some Ilford F.P.3 film from late 1940s. Ilford introduced F.P.3 in 1946; my box had a leaflet inside the box dated to May 1949. I had previously tested this box of film by shooting a sheet with my Ensign Klito camera; the FP3 film has some degradation due to its age, but by increasing the exposure and achieving a denser negative means this became less obvious - it shows more clearly in areas of flat tone. Despite being nearly 70 years old, the film was still quite responsive: I shot a first few exposures rated at 25; however, with some uneven marks that I suspected might be due to the interleaving black paper (possibly not acid free), I subsequently rated the films at 12 to reduce the appearance of these marks.

Ilford F.P.3 film, rated 25
Ilford F.P.3 film, rated 12
Finally, I also shot some process-type emulsions in both film and plates. I used some Kodak Ortho Type 3 film with a 'develop before' date of April 1970 and Ilford N.50 Thin Film Half Tone plates, dating to April 1957. As expected, both these emulsions were high in contrast, which was a little problematic with subjects containing bright sun and deep shadows, shot on sunny evenings. The Kodak film was stand developed in Ilfotec LC29 with a high dilution of 1+150, while the N.50 plates were tray developed in R09 One Shot, also at 1+150, by inspection under a red safelight.

Kodak Kodalith Ortho Type 3 film
Ilford N.50 Thin Film Half Tone plate

Sources/further reading:
The Midg on Camera Wiki
The Midg on Living Image
The Cottingley Fairies photographs
Detective Cameras on Early Photography, including the Midg