Showing posts with label Ilford Mark V. Show all posts
Showing posts with label Ilford Mark V. Show all posts

Wednesday, 13 July 2016

127 Day Summer 2016

Vest Pocket Autographic Kodak with Ilford FP4 Plus
For yesterday's 127 Day I shot two new (to me) 127 format cameras: a Vest Pocket Autographic Kodak and the V.P. Twin. I shot 120 film cut down to 127 size, and 35mm Ilford Mark V film taped to 127 backing paper, with both cameras. The Vest Pocket Kodak had problems with light leaks from holes in the bellows which I had been attempting to find and fix the day before; incidentally, both cameras had issues with film flatness, causing some distortions in the negatives, especially with the V.P. Twin, although less noticeable in the shots with the smaller frame size on the 35mm film.

V.P. Twin with Ilford Mark V
V.P. Twin with Fomapan 200
V.P. Twin with Ilford HP5 Plus
V.P. Twin with Fomapan 200
Vest Pocket Autographic Kodak with Ilford Mark V
Vest Pocket Autographic Kodak with Ilford HP5 Plus
Vest Pocket Autographic Kodak with Ilford HP5 Plus

Tuesday, 16 June 2015

126 Day 2015

Agfaphoto APX 400 126 cartridge reload
Having recently shot a reloaded 126 cartridge with the Kodak Instamatic 300 that I had found in the Hötorget flea market in Stockholm, I had found the 300 to be fairly unsympathetic to being used with 35mm film; results last year with a different model camera, an Instamatic 25, were much better, which I wrote about my post 'My first camera'. It was difficult to advance the reloaded film in the 300 model, resulting in overlapping frames and torn sprocket holes from the pin designed to locate the single perforation on 126 film. The Instamatic 25 is kinder on 35mm film: the negatives show stress on some of the perforations, and some scratching, but none of the tearing that the Instamatic 300 had, and film advancement was easier.

Last Friday, 12th June, the Kodak Instamatic 25 was the camera I chose to shoot for a '126 Day', not a camera or film format related day I usually observe, though I did shoot a roll of expired Perutz transparency film with an Instamatic camera two years ago. In the post 'My First Camera', I detailed how I reloaded the plastic 126 cartridge with 35mm film; last Friday I shot a cartridge reloaded with Agfaphoto APX 400 and one with Ilford Mark V. The Instamatic 25 has a single aperture, f11 and two shutter speeds, full sun at 1/90th, or half-sun/flash, 1/40th. Although a 400 ISO film might be too fast not to be overexposed for sunny conditions in the camera, the latitude of the film meant that the exposures, both interiors and exteriors came out well.

Agfaphoto APX 400 126 cartridge reload
Agfaphoto APX 400 126 cartridge reload
Agfaphoto APX 400 126 cartridge reload
As well as a cartridge with Agfaphoto APX 400, I also used some Ilford Mark V Motion Picture film, as I had done last year. Originally 250-500 ISO, after forty years this film has lost quite a bit of sensitivity and I shot this during the evening while the light was going, so the results were not as good. It also seemed to have a greater tendency for overlapping frames, possibly due to having different perforations to standard 35mm still camera film. Occasionally, the overlapping multiple exposures were worth scanning as a whole composition.

Ilford Mark V 126 cartridge reload
Ilford Mark V 126 cartridge reload

Sunday, 7 September 2014

My first camera

Kodak Instamatic 25
The 126 'Kodapak' format introduced by Kodak in 1963 was in essence a reinvention of the point-and-shoot box camera. The easy-load, drop-in cartridge was marketed as an answer to common problems of loading roll film. The cartridge was designed to make this fool proof: it is asymmetric, so will only load the correct way around, winding is in one direction only, and it is also protects exposed film, except for the current frame, if the camera is opened. This two-chambered design does have the drawback of making the 126 cartridge bulky: its main competitors in terms of format when it was introduced would have been 127 rollfilm (Kodak was making many 127 cameras in the early 1960s) and 35mm, the films themselves being both much smaller. The Kodak Instamatic 25 was the second model in Kodak's Instamatic 126 range, manufactured in the UK. It is a basic snapshot camera, almost entirely plastic in construction: it features a fixed-focus 43mm lens, single aperture (f11), with two shutter speeds, represented by either a full sun symbol (1/90th), or half-sun/flash (1/40th). The camera, like earlier box cameras, was made for shooting outside in daylight, with film latitude to take care of variations in lighting, or flash for any other situation.

This was the first camera I ever took photographs with, at the age of eight, on holiday in the south of France thirty years ago. I used it again as a teenager until being given a Halina 35mm camera which was almost as basic (probably a Halina 260, possibly as a Christmas present in 1989), which I used until my first SLR camera as a student. After many years I found the Instamatic 25 camera again at the same time as the Pentax Auto 110. 126 film is no longer made, and it is hard to imagine sufficient demand for the cartridges to resurrect the format unlike 110 film. However, it is possible to reload and reuse 126 cartridges: the film used in 126 cameras is 35mm wide, but with just one perforation per frame, utilising a square image size of 28x28mm, although, like 110 film, 126 format also had smaller, pre-printed frames on the film, as seen on my photographs from last year's 126 Day.

126 backing paper
Although not made to be reused, I found the 126 cartridge is easy to force apart. The film has numbered backing paper with a generously long hole to register with the single perforation per frame on the film itself. There are two sets of numbers on the backing paper running both ways. The only explanation I can imagine for this is that some cameras might use the cartridge loaded the other way around, i.e. rotated through 180º, and the numbers count down the exposures rather than up, which would also require a different window to line up with the numbers. How much film can be loaded into the cartridge is limited by the length of backing paper: of the two cartridges that I had, the Perutz transparency film was 20 exposures long, while the Agfa film was 24. I have seen examples of 126 cartridge reloads online where the backing paper isn't used (the cartridge window then needs covering over) and 35mm film simply taped directly to the spool, but as the camera itself does not have a frame counter, and the backing paper may also help film flatness and prevent light leaks, it seems there's no good reason not to use it.

Reloading 126 cartridges with 35mm film
As the original film was 35mm wide, normal perforated 35mm will easily fit the cartridges. To reload the cartridges, I removed the internal spool with the backing paper, and taped the end of the 35mm film near to the end of the paper (as in the photograph above). Then, in a dark bag, I rolled the film together with the paper in all the way onto the spool to find the length and cut the film when the end of the paper is reached (the length of film which fits either 20 or 24 exposures will be shorter than the film in a 24 exposure 35mm cassette). Once cut to the correct length, I rolled the film and paper in the other direction to insert it into the supply chamber of the cartridge before closing the cartridge and taping it together at each end.

Reloaded 126 cartridges
I shot both Ilford FP4 Plus and Mark V Motion Picture film in the reloaded cartridges. Although perforated 35mm film does fit the cartridges, it is not without considerations. Clearly, the perforations will appear across the top of the frame which has a very narrow rebate (the lower edge has a much deeper rebate), but I also found problems with overlapping and missed frames due to the camera's internal pin either failing to find a perforation to locate a frame, or locating a perforation too soon after the preceding frame. After shooting the first film, it became clear that, as long as the camera has wound on far enough to cock the shutter, it is probably better to use the numbers on the backing paper rather than rely on the advance wheel stopping at a frame with the pin located in a perforation. I attempted this approach on the second film and had less gaps between frames, although this won't necessarily prevent overlapping exposures.

Ilford FP4 Plus 126 cartridge reload
Once I had developed the two films, I scanned the first frame of FP4 and realised that the lens is not fixed at infinity, the horizon being just out of focus. The functions of the Instamatic camera are circumscribed by what it's designed for: taking photographs of people, family groups, but not strictly portraits, on a sunny day. The diptych of the two successive frames below demonstrates this: the fallen branch is relatively sharp, while the horizon behind just drops out of focus (a rough estimate of the camera's focus set around 3.5m would make everything from 2 to 10 metres in focus at an aperture of f11). Scanning the film and being able to enlarge it on a monitor emphasises this however; when made, most users of the Instamatic cameras probably would not see an image any bigger than a 4-inch square print, and the limitations of focus would be quite acceptable.

Ilford FP4 Plus 126 cartridge reload
The cartridge of Ilford FP4 Plus film I shot entirely on the 1/90th shutter speed setting as the lighting condtions were mostly full sun to being occasionally overcast and was developed at box speed in Ilfotec LC29 at a dilution of 1:19. I scanned the full width of the 35mm film to balance the perforations inside the frame with the rebate at the bottom, otherwise the composition appeared top heavy.

Ilford FP4 Plus 126 cartridge reload
Ilford FP4 Plus 126 cartridge reload
The forty-year old Ilford Mark V motion picture film came out surprisingly well. I had used the 'half-sun' 1/40th shutter speed for some shots to bracket them and compensate for the film's age, although for most of the photographs this seemed unnecessary, perhaps due to the Mark V film's excellent latitude. I don't imagine that I will be using the Kodak Instamatic 25 with any frequency, as the camera and its format have too many drawbacks to be set against any of the advantages of the 126 cartridge, but it was an enjoyable exercise to shoot the camera once again after 25 years.

Ilford Mark V 126 cartridge reload
Ilford Mark V 126 cartridge reload
Ilford Mark V 126 cartridge reload
Sources/further reading:
126 Format on Camera-Wiki
Kodak Instamatics on Camera-Wiki
Instamatic 25 on Mischa Koning's Kodak Classics

Sunday, 28 April 2013

Ilford Mk V Motion Picture Film

The 35mm film format was originally developed for motion picture cameras, but the convenience of the format's small size soon led to its adoption for still photography (35mm was known as 'miniature' film, by comparison to the 'medium' format of rollfilms, and large format sheet films and plates). The famous Leica wasn't the first still picture camera to use 35mm film, but it did help to popularise the format; subsequently the Kodak Retina was designed around the 35mm daylight loading cartridge, and by the second half of the 20th century, 35mm film became the dominant film format. Meanwhile, it continued (and continues) to be used for motion pictures and was only challenged by the quality of digital very recently. There were (and still are) some film emulsions produced explicitly for motion picture use which have never been generally available in short lengths for still camera use. However, there are photographers that use motion picture stocks for still photography, with online communities catering for this niche such as Project Double-X, and the Double-X and Orwo Flickr groups.

Ilford Mark V Motion Picture Film
Looking for unusual film stock online, I found, and bought, a lot of 4 cans of Ilford Mark V motion picture film from a well-known auction site. Each can contains 50 ft of film; given roughly 5ft per 36 exposure roll of film, each can would hold about 10 rolls' worth of film. On a generic label, 'Ilford Photographic Materials', the particulars of the film are printed underneath and "Date of test 21.5.73". Shooting 35mm film at 24 frames per second uses 90 feet of film per minute: 35mm motion picture film is usually sold in 400ft to 1000ft lengths. A 50ft roll of film would last just over 30 seconds. Returning to the label, it's a question as to what the 'test' actually refers to: was the film in these cans produced for quality control purposes, to test the Mark V emulsion, or film base, or coating machinery? Or are these short reels produced for film makers to make tests with (although the syntax suggests otherwise)?

Top: Ilford Mark V perforations. Bottom: HP5 Plus
As a motion picture film, it has different perforations from still camera film, but should run through  35mm cameras without any problems: problems occur when using 35mm still camera film in cine cameras, not the other way around. The general practice of edge marking on 35mm film is to print it to be read from the same side as the negative frames, but the lettering on the Mark V film is reversed. It's marked simply "IlFORD SAFETY FILM", obviously without frame numbering, but there are numbers at intervals on the edge of the film.

For a first test, I shot a roll of Mk V with successive exposures at 400, 200, 100, 50, and 25 EI, and then stand developed the film in Rodinal diluted 1:100 for an hour, to give me a rough guide to exposure to make further tests with.

Contact sheet of Ilford Mk V test roll
After developing the first roll of film, I was struck by how grey the film looked. I assumed this to simply be fog due to age, although I later discovered the film also has a grey base. Exposures at 25 and 50 EI yielded usable results (it looks as though the highlights are beginning to block at 25); I had hoped that the film might be faster than that. At this point I didn't know what the film was originally rated at, but I had read online that it was 500 ISO; the results of scanning the negatives show them to be as grainy as a fast film, and in my experience of out of date film, as a broad general rule, faster emulsions are more affected by loss of sensitivity with age. There were also no indications of how these cans of film were stored over the past 40 years.

Ilford Mk V, shot at 25 EI
Ilford Mk V, shot at 50 EI
As a consequence of my research into Ilford Limited's operations in Ilford, I was also able to find out more about Mk V film. Silver By The Ton has an appendix of the company's products. Mark V film is listed under 'Cine and Aerial Films' with an introduction date of 1965. However, this list, unlike the lists for plates, sheet films and rollfilms, does not have ASA/ISO values attached. There is also no mention of any Mark I - IV iterations of the film: I have read some speculation that Mark V may have used a version of the HP emulsion, which was HP4 at the time (HP5 appeared in 1976). For the next couple of test rolls I tried developing Mk V as if it was HP5 Plus, using exposure to compensate for the film's loss of sensitivity, but using the same development times as HP5+. For a second test roll, I exposed the film at 25 and 32 EI, using my Agfa Optima Sensor. Cutting the roll of film in to two lengths, I developed half the roll in Rodinal 1:25 for 6m30s at 19ºC and the other half for 8m45s at 19ºC (I also shot and developed a roll using the Ilford Sportsman at the same time). I had hoped that a shorter development time might reduce the fog without the need to add anti-fog agents, but the effect seemed negligible. Comparing these results to the first roll of film which had been stand developed, I felt like the grain might be a little more pronounced, but, without shooting exactly the same subject matter, making an accurate comparison is difficult.

Mk V film, 32 EI, developed 6m30s in Rodinal 1:25
Mk V film, 25 EI, developed 8m45s in Rodinal 1:25
Further to my research on Ilford at Redbridge Central Library, I subsequently found the Ilford Technical Information Book. Rather than a book exactly, these are four ring bound manuals containing information sheets on Ilford's various products, and could be updated with new sheets when required. Dates on the information sheets of the Technical Information Book that Redbridge Library holds range from the early 1960s to the mid-1970s; Volume 1 contained the sheet for Mark V Negative Motion Picture Film, dated L68, i.e. December 1968. Although this was after I'd exposed and developed a few rolls of film, and had found workable parameters for using it, the sheet provided a wealth of information about the film:
This film has fine grain and wide exposure latitude. These characteristics, together with its high speed, make the film suitable for the production of pictures of very high quality under a wide variety of lighting conditions. Newsreel photography in poor light, filming at night and television work generally are situations in which this film is particularly useful. In the studio the high speed of the film makes great depth of field possible without the need for exceptionally powerful lighting units.
The information sheet provides the original speed ratings, two of which are given: a 'daylight average' of 250 ASA and a 'minimum' of 500 (ratings for tungsten lighting are given as 200 and 400 respectively). Under 'Special Development Techniques' it also mentions Microphen for push processing for speeds up to 1300, although it gives no development times.
Two speed ratings are quoted. The minimum exposure rating is recommended when it is necessary to achieve the maximum film speed and image quality, but this is only possible when the processing conditions are strictly related to the exposure conditions. The average exposure ensures image quality of a very high order in a wide range of exposure and processing conditions.
Sensitometric curves when developed in ID11 at 20ºC (continuous agitation).
From Technical Information Sheet A50.7
The film couldn't really be described as having 'fine grain' now, but the wide latitude does appear to still be present even with the loss of sensitivity with age: having initially thought the film might now be as slow as 25, I shot another roll at 50 EI, and bracketed either side of this with usable results (the first test had been shot on a grey winter's day, not the best lighting conditions for this). For this roll I returned to stand development, developing half in Rodinal 1:100 for one hour, and half in Rodinal 1:150 for 3 hours (I had tried this time and dilution with HP5 recently, with good results).

I wouldn't want to be prescriptive about appropriate uses of different types of film: the grain of Mark V is more pronounced than that of modern 400 speed films, and so the choice of subject matter is a consideration when using this film. The grain can appear disruptively prominent in the skies of landscape shots, but from the results of the rolls I've developed so far the subjects that work best with Mark V film, in the examples below, are those such as the dim station interior or the photograph of Dagenham Brook in fading light.

Mk V film, 50 EI, stand developed in Rodinal 1:100 for 1 hour
Mk V film, rated 50 EI, stand developed in Rodinal 1:150 for 3 hours
Ilford Mk V, 50 EI, stand developed in Rodinal 1:150 for 3 hours
Ilford Mk V, 32 EI, developed in Rodinal 1:25 for 8m45s

Sources/Further reading
Silver by the Ton - A History of Ilford Limited 1879-1979, RJ Hercock and GA Jones
Ilford Technical Information Book Volume 1

Labeauratoire (with which I am in no way affiliated) is currently selling Mark V with an expiry date of 1979. Their recommendation is 400 or 200 ISO, which suggests their film was kept better than my stock.